myTankLinker®: Auto Edition
– Automatic Tank Monitoring with Auto Pump Control
Smart ON/OFF Pump Control with Memory Retention & High-Efficiency Sensors
SKU: SMEPRO0002
MPN: MTL-AUTO-V1
MRP: ₹3,499.00 ₹2,499.00
Smart pump controller for overhead tanks. Offers auto ON/OFF control, LED tank indicators, memory retention, and high-efficiency sensor-based level detection.
📦 Interested in bulk orders or looking for a distributorship of MyTankLinker?
📲 Contact us directly on
WhatsApp
for special pricing and partnership opportunities.
Product Description:
The myTankLinker Automatic Edition is a smart water pump controller built for fully automatic overhead tank management. It uses advanced sensor-based technology to monitor the tank’s water level and automatically control your pump — turning it ON when the tank is low and OFF when it’s full.
💡 This version is ideal for homes and buildings with a single overhead tank (without underground tank involvement). It simplifies water management by removing the need for manual intervention.
🔁 As soon as the water level drops below the LOW level sensor, the pump is turned ON automatically. When the tank reaches the HIGH level sensor, the pump turns OFF — helping to prevent overflow, save electricity, and reduce water wastage.
💡 LED indicators show real-time status of:
Power Supply
Tank Full
Pump ON/OFF
💾 Equipped with EEPROM memory, the device remembers whether the pump was ON or OFF before a power cut, and resumes the same state when power returns — providing continuous reliability.
🚫 Please Note: This version does not include or use the Underground (UG) Tank sensor or UG Tank Status LED. It is specifically designed for systems that rely on a single overhead tank.
With sensor-driven automation, a manual override switch, and fail-safe reset features, the myTankLinker Automatic Edition brings efficiency and peace of mind to everyday water management.
Key Features:
⚙️ Automatic Pump Control: Automatically turns the pump ON when the tank is low and OFF when it’s full — no manual effort required.
🔁 Manual Override with Safety Logic: Includes a built-in manual switch, but only operates when it’s safe — ensuring protection from overflows and dry-run scenarios.
🔆 LED Status Indicators : Real-time visual indicators show:
- Power Status
- Tank Full
- Pump Running
- UG Tank Status LED not used in this edition
💾 EEPROM Memory Retention: Saves the last pump state (ON/OFF) even after a power failure. Pump resumes in the same state when power is restored.
⚠️ Conflict Detection: Detects inconsistent or faulty sensor signals and triggers a safe shutdown, preventing unpredictable or unsafe pump behavior.
🔄 Long-Press Reset Feature: Easily reset the device and clear memory using a long-press reset, ideal during maintenance or sensor changes.
⚡ High-Efficiency Sensor Technology: Uses durable, non-contact, and corrosion-resistant sensors for reliable performance — with filtering to avoid false triggers from splashes or foam.
🧱 Compact & Durable Design: Wall-mountable, low-footprint design — suitable for indoor installations in homes, apartments, or independent buildings.
Additional Information
In the Box | 1x myTankLinker Auto Edition Unit, 1x User Manual |
Power Supply | 230V AC, 50Hz |
Application | Overhead Tanks |
Material / Enclosure | ABS Plastic or PVC |
Control Type | Manual and Automatic |
Installation Type | Wall-Mountable |
Dimensions | 150 mm × 85 mm × 40 mm (15.0 cm × 8.5 cm × 4.0 cm) |
Supported Pump Capacity | Up to 1.5 HP (230V AC Submersible Pump) |
Maximum Tank Height | Up to 100 feet (Supports tanks up to 5–7 floor buildings) |
Warranty | 🛡️ Warranty & Policies:
|
Manufacturer / Brand | Schematics Microelectronics |
Country of Origin | India |
🛠️ How to Install myTankLinker Auto Edition — Complete Setup Guide
If you’ve purchased the myTankLinker Automatic Edition, congratulations on choosing a smart solution for water tank automation!
This guide will walk you through the step-by-step installation process, including sensor wiring, pump connection, LED status indicators, and essential safety instructions — so you can get started with confidence.
💡 This version is designed for systems with an overhead tank only. It uses sensor-based logic to automatically turn the pump ON when the tank is low, and OFF when the tank is full — eliminating the need for manual control.
🔆 LED indicators help you monitor power, tank level, and pump activity in real-time.
💾 With EEPROM memory, it also remembers the last pump state even after power failure and resumes operations smoothly when power returns.
🚫 Note: This version does not use the Underground Tank (UG) sensor or UG Tank LED.
इस पोस्ट में आप जानेंगे:
- myTankLinker Manual Edition डिवाइस को कैसे इंस्टॉल करें
- Sensor wiring और pump connection कैसे करें
- LEDs का क्या मतलब है
- और आखिर में Safety Tips
Other MyTankLinker Products
Choose the perfect model for your Water Tank as well as water pump needs.
myTankLinker®: Auto+UG Edition
Dual-tank dry-run protection & advanced logic with Under Ground Tank