NUTTYFI  is an Internet of Things Hardware platform based on ESP8266 12e series that enables user to build IoT products, Research Analysis Systems, Automation  and Projects. Using NUTTIFY, users can monitor, manage, control and search devices from any part of the world. It’s can also interface with any IOT web servers, icloud,  Local or IOT mobile platform or application easily. Number of services open source web servers & mobile apps are available in the internet that is freeware to use.

In order to make easier for developers, NUTTYFI IoT appears as a complete and best solution for IoT Products & Projects. NUTTYFI IoT Hardware has without limitation as user can upload their own code as per their requirements.Using NUTTYFI, you will capable to control your application, devices, actuators, mechanism as well as collect data from IoT devices securely. Here is not a matter of distance.

__________________________________

Getting Start with NUTTYFI- An IOT Device

Fundamental Requirements:

To Start with NUTTYFI, You have to NUTTYFI IOT Device & FTDI USB to UART Bridge.

• If you have any trouble with FTDI drivers, You can visit to our post how to install FTDI USB to UART Bridge Driver.
• You don't know how to install NUTTYFI board in Arduino Ide, visit to our post How to install NUTTYFI IoT Board in Arduino ide.

After that Connect NUTTYFI to your Computer using FTDI USB to UART Bridge & got to tools -> boards-> NodeMCU 1.0(ESP-12E Module & Select the Port like COM3.

after that copy these code (codes given below) to your arduino IDE & compile & upload to NUTTYFI & all done.

Downloads & Links: 

Data Sheet


Technical Specification


Tutorials of FTDI installation


NuttyFi Examples